Products

 

Have a question? Call.

(866) 573-9104 / (760) 930-9400

Get Covered with an Extended Warranty

Extended warranty coverage limits unexpected repair bills and protects your new laboratory equipment purchase.

Contact Us.

Torrey Pines Scientific EchoTherm™ Single Stirring Position Analog Stirrers, Hot Plates and Stirring Hot Plates. New Models with Corrosion Resistant Construction.

HP in model number = hot plate
ST in model number = stirrer only
HS in model number = stirring hot plate
A in model number = aluminum top
C in model number = corrosion resistant model
Note: No letter behind the model number = ceramic top not purgeable chassis

HP1 $380.00 HS1 $475.00 ST1 $380.00
HP1A $380.00 HS1A $475.00 ST10 $455.00
HP10 $435.00 HS10 $520.00 ST11 $650.00
HP10A $485.00 HS10A $545.00  
HP11 $650.00 HS11 $790.00  
HP11A $750.00 HS11A $855.00  
HP11C $750.00 HS11C $890.00

Features:

  • Heat to 450°C on plate surface in minutes
  • Stir from 100 to 1500 rpm on each stirring position with individual controls
  • Stir 2 liters water on HSI and ST1
  • Stir 2 liters water on HS10 and ST10
  • Stir 10 liters water on HS11 and ST11
  • Plate size on the HS10, HP10 and ST10 is: 8” (20.32 cm) x 8” (20.32 cm)
  • Plate size on the HS1, HP1 and ST1 is 6” (15.24 cm) x 6” (15.24 cm)
  • Plate size on HS11, HP11 and ST11 is 12” (30.48 cm) x 12” (30.48 cm)
  • Solid ceramic heater surface for excellent chemical resistance
  • Corrosion resistant models for aggressive chemicals. 12” tops only
  • Milled-flat cast aluminum tops for even heating in 6” x 6” and 12” x 12” models
  • Heater plate mounted in cast aluminum frame that remains cool for safety
  • Efficient 600 watt heaters on the HS10 and HP10
  • Efficient 400 watt heaters on the HS1 and HP1
  • Powerful 1400 watt heaters on ceramic-topped HS11 and HP11 and 1200 watt heaters on HS11A and HP11A
  • Fused for safety
  • Rugged cast aluminum chassis
  • 12-month warranty
  • UL, CSA and CE certified

Product Description:

Each Torrey Pines Scientific hot plate is made with a cast aluminum chassis that is painted with chemically resistant epoxy paint. The chassis is designed to keep spills out of the case. Corrosion resistant models have most air holes closed off and have purge ports for putting a positive pressure of any inert lab gas into the unit. Positive pressure inside the chassis keeps the corrosive gasses out. This extends the life of the “C” version units when working with aggressive chemicals.

Heating and stirring controls are solid state with individual indicator lights, which illuminate when either is activated. The controls are well forward of the heater surface to prevent accidental burns. Additionally, the solid ceramic heater plate is framed in cast aluminum and is designed to keep heat from the edge of the heater plate.

Product Specification:

Hot Plate:
Solid ceramic
Maximum temperature of the plate surface Aluminum: 450°C

Ceramic: 450°C

Time to maximum temperature, unloaded Aluminum: 10 minutes

Ceramic: 3 minutes

Temperature control Aluminum: +/-2.5°C

Ceramic: +/-2.5°C

Heater power, watts HS1 & HP1: 400 watts

HS10 & HP10: 600 watts

HS11 & HP11, Aluminum: 1200 watts

HS11 & HP11, Ceramic: 1400 watts

Stirrer:
Speed range unloaded 100–1500 rpm
Maximum load, aqueous HS1, ST1: 2 L. HS10 and ST10: 2 L

HS11 & ST11: 10 liters

Magnet strength 20 lbs
Weight capacity on heater surface Over 50 lbs (22.5 kg)
Electrical:
Operating voltages available 100 VAC/50 Hz, 115 VAC/60 Hz, 220 VAC/60 Hz and 230 VAC/50 Hz
Power consumption HS10 and HP10: 650 watts

HS1 and HP1: 450 watts

ST10 and ST1: 100 watts

HS11 and HP11: 1450 watts

HS11A and HP11A: 1250 watts

ST11: 100 watts

Current Draw 100/115 VAC Models:

HP1 and HS1: 3.75 amps

HP10 and HS10: 6.5 amps

HP11 and HS11: 12.0 amps

HP11A and HS11A: 10.4 amps


220/230 VAC Models:

HP1 and HS1: 1.9 amps

HP10 and HS10: 3.25 amps

HP11 and HS11: 6.0 amps

HP11A and HS11A: 5.2 amps

Additional Information:
Unit size HS10, HP10 and ST10: 12” (33 cm) deep, 9” (22.9 cm) wide and 3.5” (8.9 cm) tall

HS1, HP1 and ST1: 10” (25.4cm) deep, 7” (17.78 cm) wide and 4.5”(11.43 cm) tall

HS11, HP11 and ST11: 18” x 12.5” (without line cord plugged in) x 5.5”

Unit Weight, unpacked HS10 and ST10: 10 lbs (4.5 kg)

HP10: 8 lbs (3.6 kg)

HS1 and ST1: 7 lbs (3.17 kg)

HP1: 5 lbs (2.26 kg)

HS11: 20 lbs

HS11A: 22 lbs

HP11: 16 lbs

HP11A: 18 lbs

ST11: 13 lbs