Products

 

Have a question? Call.

(866) 573-9104 / (760) 930-9400

Get Covered with an Extended Warranty

Extended warranty coverage limits unexpected repair bills and protects your new laboratory equipment purchase.

Contact Us.

Torrey Pines Scientific EchoTherm™ HP50 and HS50 Compact, Simple Digital Hot Plates and Stirring Hot Plates

Heat, stir and time accurately with easy to use, fully featured, compact hot plates and stirring hot plates.

HP in model number = hot plate
HS in model number = stirring hot plate

HP50 $915.00
HP50A $940.00
HS50 $1,000.00
HS50A $1,025.00

Features:

  • Extremely easy use by anyone in your lab
  • Two memory buttons for storing your favorite settings for heater and stirrer for instant, one-button recall and use
  • Platinum RTD temperature measurement for precision and accuracy
  • Solid ceramic heater top for quick heating on a flat, white, chemically resistant surface. Milled flat cast aluminum top also available
  • Cast aluminum framed ceramic heater top edges stay cooler to prevent burns
  • PID temperature control for exact, tight sample control of plate or solution
  • Timer goes up to 99 hours, 59 minutes and 59 seconds with settable Auto-Off for exactly timed sample preparation
  • Electronic calibration stored in chip. No batteries to replace
  • 6” (15.24 cm) ceramic glass or aluminum tops
  • Strong motor and magnet for stirring most samples
  • Stir 2 liters of aqueous solutions
  • Full featured digital display for checking all parameters instantly
  • Fused for safety
  • ETL, CSA and CE certified
  • RS232 interface for control or for data collection on a computer

Product Description:

The EchoTherm HP50 and HS50 are designed to be the easiest to use and most accurate fully featured hot plates and stirring hot plates in the world. Temperature measurement of a solution is accurate to 1% over the entire temperature range using a 100-ohm platinum RTD sensor and measurement system.

Calibration of temperature is electronic and stored in memory. The calibration is set at the factory but can be done easily in the field using the probe calibration kit offered as an accessory.

The chassis on both models is cast aluminum designed to keep spills and heat out of the electronics. They are coated with chemically resistant epoxy based paint for durability.

Product Specification:

Hot Plate:
Dimensions 6” (15.24 cm) x 6” (15.24 cm)
Maximum temperature of the plate surface ceramic top: 450°C; cast aluminum top: 450°C
Temperature control type PID
Temperature accuracy 1%
Temperature regulation, solution or plate ±1°C
Heater power in watts ceramic top: 400 watts; aluminum top: 400 watts
Temperature Measurement:
Platinum RTD 100 ohm, in plate and in probe
Range ceramic top: 0–450°C; aluminum top: 0–450°C
Readability 1°C
Stirrer:
Speed range unloaded 100–1500 rpm
Capacity 2 liters of water
Readability 10 rpm
Settability nearest 10 rpm
Electrical:
Available in 100, 115 and 230 VAC, 50/60 Hz
Ceramic top 100 and 115 VAC, 4 amp; 230 VAC, 2 amp
Aluminum top 100 and 115 VAC, 4 amp; 230 VAC, 2 amp
Fused Yes
Line cord Detachable, 6 foot (1.8 meter), three-wire, grounded
General:
Dimensions, unpacked:
Ceramic top 7.0” (17.8 cm) wide, 10.0” (25.4 cm) deep, 4.5” (11.43 cm) high
Aluminum top 7.0” (17.8 cm) wide, 10.0” (25.4 cm) deep, 4.5” (11.43 cm) high
Dimensions, packed
Ceramic and aluminum tops 15” (38.1 cm) by 9” (22.86 cm) by 9” (22.86 cm)
Weight, unpacked
Ceramic top 7 lbs (3.17 kg)
Aluminum top 7 lbs (3.17 kg)
Weight, packed
Ceramic top 9 lbs (4.07 kg)
Aluminum top 9 lbs (4.07 kg)

Accessories Available:

HS50-600 Probe, Immersion, as supplied with unit, 4” stainless steel $105.00
HS30-600 Probe, Immersion, 6” stainless steel $110.00
HS30-601 Probe, Immersion, 10” stainless steel $135.00
HS30-602 Probe, Immersion, 6” ptfe $120.00
HS30-603 Probe, Immersion, 6” solid glass $200.00
HS30-604 Probe, immersion, 9” solid glass $265.00
HS50-600 Probe, Immersion, 4” stainless steel $105.00
HS30-700 Temperature Probe Calibration Kit $65.00
HS30-800 Plate and Probe Calibration Kit $435.00